12 Comments

Congratulations , super nice build !

I was following your finishing question forum about which finish to use. I see what you decided on and the beautiful outcome. Well done !.. It turned out great !

Measure "at least" twice and cut once

Congratulations Monty. That is a pretty complex first project and an excellent result. The sky’s the limit now. I wonder what you’ll be making for your tenth.
A violin? :-)
Nice work.

The early bird gets the worm but its the second mouse that gets the cheese.

Monty, it looks to be very well done. You should have gained some major points with LOYL toward buying any new tools you might happen to “need” for your next project. :D

-- Art

Wow, you sure tackled many skills for a “first” project. Well done!

HorizontalMike

Monty, This is a nice build.
The wood combo is pleasing to the eye. The dovetail keys are very fine ( a jig there maybe?)

Job well done.

Abbas, Castro Valley, CA

your first? What?!!!!!!!
Amazing
beautiful
and I LOVE the pincushion tops!! Brilliant.

Toxins Out, Nature In - body/mind/spirit

Thanks everybody! I had a lot of fun making it, and learned a lot of valuable lessons along the way. KDC68, the finish was exactly what we were looking for. The stain woke the grain up and the shellac highlighted it. I figured the carnauba would protect the shellac, but I don’t know if it will or not.

Shipwright and Mike, I didn’t know how complex this was going in. It’s probably better that I didn’t, or I may not have done it. Project number two will involve a whole different set of skills such as mortise and tenon joinery, maybe dovetails, a bowed drawer front and tapered legs.

Thanks Ianwater. I’m very happy with how the cherry stands out against the ash, but doesn’t shout at you. The only jig I used was one I found here It worked well enough, but if I ever do it again, I will make a deeper jig. Holding large boxes in the 2×4 was difficult. The keys were much harder to make. I started with 3/4 stock and crept up on the final thickness with the dovetail bit until they fit snugly. The problem was, when I tried the initial fit it was fine, but the further into the long stock I got, the looser the keys were. I finally discovered that the cheap plastic fence on my router table was moving slightly, not matter how much I tightened it. I got around it by cutting the stock shorter and also clamping bracing blocks behind the fence. I have been researching shop built router tables, so at some point in the near future I’ll build one.

Where are the band-aids?---Pro Libertate!

Here is a better shot of the pin cushion tops, and a few other details. The pin cushion idea was mine, but mama picked out the material.

Where are the band-aids?---Pro Libertate!

Thanks for the extra pictures and explanation Monty.

Abbas, Castro Valley, CA

Outstanding,great build

woodworking classes, custom furniture maker