Search Results

7 results

Brian 3 comments

Stupid tape measure. Always proving me wrong. I got my first box make and installed, which was for the CMS. I needed to get that thing off the floor. Finally it is and I’m no longer tripping over it. This one single thing is what was mainly...

shipwright 0 comments

*OK, I’m about *10 hours in now ( maybe 8 productive and two wasted on one bad measurement….don’t ask) and I have the structure built and mounted. Everything fits and it is very stable. The drum spins almost perfectly true and the dust collection...

TonyCan 11 comments

Well i am at it again, i had an idea, its been done before, but not quite like this, plus a lot less expensive. When ever i start i like to take a shot of the raw materials. Here it is on top of my work bench. So i started by putting the...

3fingerpat 10 comments

First up was to cut away the necessary waste from the tenons on the two side aprons to accommodate the front rails, now onto the legs. The finished leg will only be 5/8" square at the bottom of each leg, so I marked out that square on the...

Bentlyj 8 comments

I got a commission to build a desk/closet/Murphy bed. Here is the SK drawing of the build. The right hand side will house the Murphy Bed. The unit will be Walnut with Black accents being the CounterTop and Base at the bottom along with the...

prxis 7 comments

My family lives in a small 850sf, 2 room apartment on the ground floor. We are also fortunate enough to have a ±200sf patio. My wife and I have come to a mutual arrangement that for the sake of both our sanities, we need our patio to function...

MontyJ 2 comments

I put one coat of Minwax Natural stain on the boxes and lid frames. It highlighted the grain perfectly so I’m stopping there. I really like the way it made the dovetail keys stand out. I also have the frames finished and have the foam and...