Table Saw Set-up Gauge

I designed this guide back in the eighties, to allow me to be sure my table saw top was positioned exactly ninety degrees to the blade, and for setting up cuts on my, then, less than reliable fence. A table saw blade must be perfectly ninety degrees to the miter slots of your table saw top, or it will go through wood at an angle, essentially widening the blade and making even good blades seem dull. Just as an out of align table saw top will cause poor and difficult cuts, so will an...

L-square Stop - Depth Gauge - Table Saw Setup Tool

This tool serves several functions. It can be used as: - an edge stop for L-squares; - a wide gap depth gauge; and, - as a set up tool for table saws. This tool allows the user to, easily, lay out lines at ninety degrees off a straight edge using a standard L-square. Using it is far quicker and more accurate than the usual practice of trying to hold the square to the edge of the material. In the depth gauge mode, this tool also allows the user to establish depths...