Different techniques applied in making the woodtoy models #2: Making a fender

694
8
In this series I want to show what different techniques I use to make my models. I appreciate comments, especially if you come up with another proposal to achieve something.

In this second episode you can see how I made the fenders of the 2CV. Enjoy and let me know what you think about it.



https://dutchypatterns.com/


Did you cut that curve with a bandsaw or scroll       saw and then sand?

If your first cut is too short... Take the second cut from the longer end... LBD

Pictures 5....scroll sawing the curves.

Sanding is for later on

https://dutchypatterns.com/


 Dutchy
 commented about 1 hour ago
new
Pictures 5....scroll sawing the curves.

Sanding is for later on

Bocsánat!... I missed that one.

If your first cut is too short... Take the second cut from the longer end... LBD

I love the process Dutchy, Experience shows!
Hey Dutchy, Great photos and a terrific idea.  My only question is what happened to the "screw to anchor parts" in Photo 6 is definitely not there in the following photos.  Did you switch to double side tape?

thanks for the insights.  Very helpful.
Dave
PapaDave
commented 43 minutes ago
Hey Dutchy, Great photos and a terrific idea.  My only question is what happened to the "screw to anchor parts" in Photo 6 is definitely not there in the following photos.  Did you switch to double side tape?

thanks for the insights.  Very helpful.
Dave
I did one with a screw and one with super glue. 

https://dutchypatterns.com/

Dutchy:   I think superglue is the winner here.  Leaves nothing in the way for sawing and sanding.  Perfect.  Thanks. 
Great to see how you do a build !