oak

Normally I make my toy wheels on a lathe but this time I didn,t and below you can see how I made them this time. Thanks for watching

Working with reclaimed wood can be very rewarding once the final product comes together. Unless you are purchasing it from someone who has already ...

Just a quick post of the stretchers dry fit. I still have to add the 2×4 and tension mortise it all in. , As always questions and tips welcome. Tha...

With the legs already cut to length its time to glue them up. I have the joinery drawn out on the top roughly so that after cutting the boards the ...

I have just finished drilling the pilot dog holes into the top boards that I have vises for. This will allow me to have a nice straight batch of do...

I received the crisscross from Lee Valley late yesterday, and started mocking it up to see what needs to be done. I glued up the last piece of the ...

Work Bench Build #3 Wood Selection And Layout I got to use the bench to build a bench right away to lay out the boards for the top. But I removed t...

Let’s make one of the wheels! It’s the wheel at the bottom of the spindle.  [image.png] [image.png] I made the rims on my CNC  [image.png] [imag...

A slow day again, only an hour work, but I managed to install the face Vise. I am using the Vise on the end of the bench instead of the front face....

This is a repost from LJ. So I can continue the series.  After building a new woodworking workshop last year I was searching for a new project to ...

The first thing to build is the base of the underpart of the windmill. It is made up of 8 pieces with lapjoints to make a octagon. It is called the...

This small mill has two doors. This is done so the housing is accessible even when the wings of the mill are turning in front of the door. [Image] ...