re: Finishing Helpers: Jigs, Fixtures, Stands, Etc.

well i dont use a lazy susan but what i have done is cut some blocks of wood 2" by 2’ and drilled a hole dead center and ran drywall screws through to make my own finishing points. the dryway screws have a very sharp point that dosent leave a mark on the bottom or backs of the things i am finishing. i always spray the backs or bottoms first then lay it on my points the finish the rest as it sit there. Doors if they have the 35mm cup holes rockler has the hanging jig that fit right into the cup and snug up then you can hang it that way you can spray your door completely. otherwise i always assemble everything before spraying and if they are regular hinges i already have the holes there so i use eye hooks in the hinge holes and use old wire hangers to make s hooks and hang the doors that way bigger projects i just use blocking under the project to raise it up. on really small stuff i use very small nails and bend the to make a hook and drill a small hole 1/64th and put the nail in the hole then hang from sting. well thats about it