This is the "Loft". I built the shop back in 2020 just before the big price increase in materials. The footprint is 16' x 32' and the porch on the end is 5' wide, that is giving me about 425 square feet inside. I install a separate 200 Amp service which is ran underground. I took over a year to design the building and made several changes during that time. In my design I wanted to have a hard airline running around the shop, a DC System, and HVAC, 2 of the 3 are installed since the construction. I built a loft at each end to store items not used frequently and lumber, also a place to house the DC and Air Compressor, both of which are on a dictated circuit with a switch outlet.
There has been a few upgrades to equipment and placement of items around the shop even in the short 2 years it has been up and running. I built the benches from the leftover materials from the build and have purchase a few more tools which for the most part have been used and restored myself. And I continue to build out the storage needs for the shop.
The interior photo's are recent during the installation of the DC System. The DC still has a bit of work to get all of the machines connected, but the big producers are connected.
I ahve replaced the miter saw with an RAS, picked up a larger bandsaw, a jointer, and I have built a larger surface for the TS. As you can see the shop is a work in progress. Thanks for looking.
