X-Sense Smoke Alarms

266
20
well about a couple weeks ago i came into my shop to find it full of smoke coming from my cabinet saw. something hot landed in the saw dust and had been smoldering for a couple hours. i decided it was time to install smoke alarms. after some research i went with the x-sense brand because you can interconnect up to 18 alarms. i also bought their remote that lets you test the alarms and silence them for a false alarm which will be great considering one alarm is 10 feet up. i went with a 3 pack so i have one in the small garage, one in the big shop, and one in the laundry room in the house. so if one alarm goes off all 3 will and by having one in the house it wont be an issue not hearing it. the range on these is 800 feet. 10 year batteries which is pretty much standard now. these cant be hard wired though which i dont find as an issue. should have done this years ago.

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

20 Comments

I will be interested to hear how well this works in a workshop environment.  From what I have read, most smoke detectors will go off from sawdust in the air so you may find it is too much of a nuisance it if continually gives you false alarms.  A quick search does find some that are supposedly for dusty environments but I have not done any research.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

yes thats what im curious about, will it give false alarms due to dust ?

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

I read that in dusty shops vacuuming out the alarm often is reccomend.    Needed or not,  ???????

Ron

Don't forget to have multiple fire extinguishers around the shop too!  I have them near both entrances and 2 more by my grinder and belt sander where there may be sharks from grinding and sharpening.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

From what I have read, the battery operated ones usually use ionization detection which is more prone to false detection from dust and other particles in the air.  The photoelectric ones are supposed to be less susceptible to dust  but supposedly, there are some that have better dust exclusion barriers that should further reduce false detection.   Putting them farther away from heavy dust sources may help.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

in the big shop i have it 10 feet up so hopefully dust wont be too bad ? ill soon find out.

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Holy crap, I'm glad that stayed at smoldering and never got any further than that!  That's terrifying.  I once had a spark from easing the rear edges of my bandsaw blade start to smolder in some of the saw dust around the blade guides, despite my best efforts to clean it before I did that (I always vacuum my band saws out when I change blades... never easier than when there's no blade).  Luckily I remembered a warning story from ToddJB from back in the day, and make sure I always check for that kind of thing, just in case.  

I like the idea of the interconnected smoke detectors.  I've got smoke and carbon monoxide detectors in my shop, but if they go off and I'm not around to hear it... is it really a fire? (Yes, the answer is yes).

MosquitoMade.com

Mos, What model of detectors are you using?  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

in my case there was very little saw dust in the cabinet because i had just cleaned it out a few week before so even if the dust ignited in a metal cabinet it probably would not have been an issue, and i dont ever wanna have an issue !

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Same with mine Pottz, but you never know lol  

Not sure Nathan, I'd have to look to be certain, but I believe they're basic Kidde for both

MosquitoMade.com

Interconnected, 10 year non-replaceable battery is now the standard for just the reasons mentioned…hardwired is best, but the 10 year battery is plenty fine. Especially for a shop, having one of the SDs inside the house is very smart…so you’ll hear it right away if it goes off. You do need to be careful of dust build up, and also how you clean them, but it can be done. Fire extinguishers by any/all the doors, and shake them vigorously up and down every month if you think about it…the powder settles and cakes into an unusable mass otherwise. It also forces you to practice removing it from its mount and reinforces where it is located in your mind. You tend to forget things during an emergency and repetitive interaction with your fire extinguishers will cement it into your brain!

Ryan/// ~sigh~ I blew up another bowl. Moke told me "I made the inside bigger than the outside".

That's a great tip on shaking the extinguishers.  Heading out to the shop now to give them all a shake.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

BTW, you should replace your smoke detectors after 10 years, regardless.  The ionization detectors at least have a 10 year life and lose effectiveness due to radioactive decay of the ion generating material.  They should have an expiration date on the back.    If they do not, they are probably ancient and should be replaced anyway.   The previous set that I installed actually started beeping periodically and when I checked the date they had just expired.  They had started giving me false detections (why does this always happen at 3 am) for the last few months before they started giving me the periodic beep.   The end of DST is a good time to test them and check the date.    I am now adding shaking my extinguishers to the mental DST checklist as well.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

never heard about shaking them either. i do have 3 in my shop.

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Pottz,

I spoke to a fire prevention vendor in TX (they were sponsoring a hole).  For a garage they recommended a "heat sensor".  They said a woodshop would likely give false alarms due to dust.

Heat detection may be to late of an alarm because the amount of heat to trip the alarm might mean there already is a fire.  I have some homework to do on this.

Petey

I've also got 3 extinguishers in my shop, one by the door (big one), and two smaller ones, one by the CNC and one on  the opposite wall from the entrance door (by the laser, the machines, and electrical panel).  That puts one on each wall that isn't the garage door wall, but the entry door extinguisher and the laser corner are both on the garage door end of their walls, and the CNC is on the back wall.  

Shaking is a good tip, I'll have to go out and do that.  I do check the pressure gauge on them whenever I'm near them though.  As I've been replacing detectors in the house I've been using the 10 year sealed battery units as well.  I'll have to start switching to interconnected ones now... 

MosquitoMade.com

yeah i dont like the heat sensor idea. the situation i had with it smoldering would mean the sensor wouldn't have alerted me to a potential fire until the shop was in flames. no idea how much dust it will take to set the alarms off. i do have the remote to silence them if a false alarm goes off.

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.


 Mosquito
 commented 2 days ago
I've also got 3 extinguishers in my shop, .....

Shaking is a good tip....

Shaking IS a good tip, however, powder egstinmgushers are not recommended for lasers (and maybe CNC's)... The powder would/could probably do as much damage as the fire... a CO2 was recommended for such... and water is only useful to those bunnies that don't drink their scotch straight... however, if the fire is well established, you can't even write off a full bladder.

If your first cut is too short... Take the second cut from the longer end... LBD

welcome back my duckling !

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.