Acme Tools

694
22
This is just fyI  -   I found out today that Acme tools offers a military discount.  It's something you have to ask for but none the less, it's available.   I was told it's on a sliding scale and that tells me that it's probably a 10% discount up to a max of $150.  I got the max of $150 and that paid my state sales tax and most of the lift gate fee.  

22 Replies

It's a real company? -  I honestly thought it was just a made up brand for Roadrunner cartoons.
Wrong side of the pond I guess.
Yeah, I wanted a Road Runner but all I got was a Nova Voyager  -  bummer 
A Road Runner would be sweet too.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

mike i never thought it was a real company either !

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Road runner ?

I will get you!

Regards Rob

I ordered some small stuff from them awhile ago. They do make the best anvil's though
Thanks for the info Dick.

Nathan, sweet Road Runner.

Main Street to the Mountains

Envious here Dick. That is a nice DP. The car would have been sweet in that vintage too. 


Actually, back in 1964 a friend bought a Plymouth Satellite.  2dht w/318 and 4 speed    I think at the time it was may have been at the low end of the spectrum ($$$$) but a really sweet looking car.
I think there are a couple of Acme tool companies.  There are some around here that are based out of North Dakota.  They have 8 to 10 stores in Iowa, SD, ND and MN.  They are nice, they are having trouble finding quality people that have customer service skills.  Then I saw another Acme tool on the internet...I know zero about them....

My brother had a GTX, the dodge version of a road runner.....they were big cars!  I always wanted a 'Cuda...never got one.

Mike

I'm a fan of Acme tool. I've ordered almost all my cordless tools from there, as well as my drum sander. I didn't have to pay an extra freight charge, and got it in 2 days via lift gate to my garage (perks of being close to their Grand Forks distribution center I suppose). Haven't had a bad experience with them yet. Though the military discount doesn't apply to me, it's nice to hear they offer it. 

A Plymouth Superbird  (Road Runner) is a dream car of mine. One I'm sure I'll never own, but still

MosquitoMade.com

I had to pay a $75 lift gate fee  -  could have had it delivered to my local lumber yard and unload w/a lift truck but then still would have to get it home and off the back of my pick up.  
Without help, it would end up quite a chore, I learned that much when I got the Rikon band saw.
Applause for Acme tools  -  I ordered my Voyager on the 23 of June, it arrived today June 30 at 11:45.   It's 1:35 PM right now and it was set up and ready to run.  
Justification for such an expenditure  ?   Pretty sure I don't need to justify anything, just need to thank my wife for her understanding  -  she actually said go ahead and and order it, I don't care.
Sounds like you need to make her something special or take her out on a date Dick.

Main Street to the Mountains

so far all I have say about my Voyager is that it is somewhat of a learning curve with precision.   Sure does make a few of my repetitive procedures dumbass simple.
I came close to buyers remorse, then like anything else I jumped in and it's making sense now.  
That is good Dick, glad the new tool is working for you.

Main Street to the Mountains

Thanks Eric,  A guy can't have too many toys - I mean tools.  I guess my next question for the masses is whether the Voyager falls into the CNC category since it does have an onboard computer  ?   I like to think not because although I get to tell it what to do, I still have to manually do it.   
Not sure about that one, I don't know much about it.

Main Street to the Mountains

If it is moving the quill up and down to drill the holes to a specified depth, then yes, that might qualify as a simple CNC operation.  If it just controlling the speed, then I would say no.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

If it is moving the quill up and down to drill the holes to a specified depth, then yes, that might qualify as a simple CNC operation.  If it just controlling the speed, then I would say no.  

Then any drill press could be considered a CNC  ?    Shucks, I've had a CNC for years and not only that, my radial drill press should be a super CNC  ?