Dutchy

Today I started making the rims. See pictures below, Next time more. Thanks for watching

The wheels were split and again glued together. I love woodworking. First destroy and then reassemble. Below the process Thanks for watching

In this blog you can see how I made a cove profile on my small router table. Also made the grooves in the wheels on my table saw. Below you can see...

For the wheel grooves I needed a jig. Used my tractor wheel jig and made a little expansion. The pieces A,B and C are from the tractor wheel jig. P...

I started making wheels for my two cranes and aslo this new blog. Could have published it in the crane blog but preferred a new blog because you ca...

Last week I made two hydraulic cylinders. The cylinders should be able to hold the crane boom in position. Therefor I additional made a “clamping” ...

A while ago I started another T and J building process. And from that what I think might be interesting I will make a blog entry. According the pla...

After posting the link two weeks ago to woodworkers toolshop Baptist I got questions about how I had made the church, in particular the bricks. It ...

Last week Baptist (a nice and friendly Dutch tool shop for woodworkers) posted some pictures from my work on his gallery page. I have to admit that...

Last year I made two carving knives and when I was on holiday I did the first attemt to do some chip carving. I liked carving in front of my carava...

Normally I make my toy wheels on a lathe but this time I didn,t and below you can see how I made them this time. Thanks for watching

Below 20 pictures from making a jig. This jig is used on a router table to make notches in tractor wheels, but it’s also possible to use it on circ...