I'll admit it's probably because they are fresh in my mind and on my workbench, but I have used them extensively in favour of other setups since making.
RyanGi commented 1 day ago Nice write up! I’ve got one of those Rockler goose necks. Works well for my drill press table, but it is stiff. I extended the T-track off the back of the table making a less severe bend to get the hose where it needs to be.
If I remember properly when I bought it, it was for the lathe using the 100mm ducts. With the heavy duty ducts it was manageable... I then upgraded so I moved it to my drill press... abdolute dissaster... I practically have to stand on the tabletop to force it into a bend... a directional bend was practically out of the question... however, the slightest touch of the hose would send in a 180° spin.
If your first cut is too short... Take the second cut from the longer end... LBD
