RyanGi ..... Do you have issues with the feathers deforming or snapping?
Time gets lost, but going by the dates of the STL files, I have been using them since 2014/2015... which even surprised me. The white, 13 toothed one in the gallery, green in the SketchUp model, has been used in probably a conservative 20-30% of all my tablesaw cuts since and its the same one without breaking or deforming... it's only injury was kissing the saw blade, and not being a 3D techo, all I ever used was what I believe is/was called ABS+.
Then thin green one in the gallery, blue in the SketchUp, I've used a few time on thin stock and I don't remember using the 26 teeth, pink (SketchUp model) other than trying after printing. WOW, going by that memory/stats, I'm gob smacked.
If I remember correctly, I did have a few amateur's OOPSIES during initial printing, which may account for all those STL files, as I only have a few active 3D printed featherboards.
FAIW, this SketchUp screen dump, was doctored for clarity for presentation.
If your first cut is too short... Take the second cut from the longer end... LBD
