My Shop(s)

164
5
   My Wife and I moved into our own Home 10 years ago last February...
In the Apartment we had just left, my Shop was located in the Cellar...
a Cellar, that flooded after every Rain, and was numbingly cold in the Winter!
I was thrilled and excited to have a dry space again to relocate my Shop to...
as with all shops, the equipment was moved around several times
before a more or less comfortable flow was found....
But this basement, has it's own issues!
I spent more time working on the shop than in it,
Tearing down the drywall that somebody had put up for a ceiling (badly)
Cleaning out old wiring, upgrading the lighting, replacing overhead beams,
repairing windows, adding a small forest of 4"x4"s to hold up this old House...

But for all of that work, I still was faced with the facts...
Though this is a dry Cellar, it is about 25' away from a major roadway,
and with the rumbling of constant traffic, and the even heavier disturbance of Winter Plows,
it makes it the most God-awfully dustiest Place in the World!
The Block and Brick foundation slowly crumbles anything loose off of it (or between it)
And it has limited access as well, the Cellar Door and a narrow stairway are the only way in or out...
Lumber can be brought in without trouble through the Window
but sheet goods have to be broken down in our driveway...
For all of that, I still felt very lucky to have a shop at all, until health issues
made negotiating the stairs difficult...
Thankfully, my health has improved, but Debbie and I (though not ancient) are not young anymore...
We've attempted to consolidate our living conditions to one level, on the first floor of our House...
When Debbie suggested moving the Shop up into the House I welcomed the idea!
Winter Warmth, Summer Coolness, Debbie for company rather than dust and spiders!

So for several months, musical rooms was played...
Our Dining Room, the largest room in our Home,
has become our "New" Living Room, while the "Old" Living Room
has become the New Shop

Most Shops have as their Core and Center, the Table Saw...
While mine is literally in the center, it doesn't see a lot of use...
The Band Saw is my preferred method of Rough or Bulk cutting and was the last major piece
to find it's way upstairs...

My small Workbench was my Grandfather's, and is now seeing third generational use...
In this location, I was finally able to bolt it to the floor, which dramatically
increases it's effectiveness for hand planing and sawing!
I replaced the bottom of an old Radio Flyer kid's wagon years ago, and gave it to my Mom,
who used it as a decoration on their Porch...

When my Parents passed away, the Wagon found its way back to me...
I use it for house repairs! When I'm working on a Room or Area in the house,
I wheel the tools to the scene, and keep them consolidated in the Wagon...

The Heart and Soul of this Man's Shop
is the combo of my small Drill Press and Scroll Saw...
Few Projects are made here without seeing some time at one
or both of these machines...

My handy little Rotor Table completes the four walls of this room
along with the Stereo and Album Collection (which will be moved out of here
when a suitable spot is found for them)...

This is still a work in Progress, and not all things have moved up from the Cellar yet...
But some things are NOT going to make the trip!

The neatly organized wood scraps are staying downstairs,
along with the Miter Saw and Planer...

There is a Vacuum set-up behind the bureau holding the Joiner...
Its hose reaches everything and everywhere down here...
The Table has most of my powered hand tools on it, Circular Saw, Reciprocating Saw,
Drill, Belt and Random Orbital Sanders, et al...

The Shelves next to the Planer hold mostly Hand Tools, collected from my Grandfather
and Father's Collections, along with a life-time of my own investments...

And in the last direction is my original, first Scroll Saw Station...

And that's it!
Two Shops, sort of, but they're still evolving...
So far I'm really enjoying working upstairs...
The only thing I've had to watch out for is sawdust on the hardwood floors,
they get as slippery as a shuffleboard!

Thanks for your Time,
and I hope you enjoyed the Tour!

3 September 2025

Mike, in Concord, NH - A candle loses none of its flame by lighting another candle...

oh wow man thank you so much for sharing your journey. i think many would be ashamed to show what they have but this just shows no matter what you have and you have skills you can create great things. and you have shown that. ive seen so many with the most limited space and tools do some of the finest work, because they have the talent. and i think your one of those special people that over comes the obstacles and makes it happen ! congrats on the upgrade man !

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

hey i just tried to add you to my collection of shops and saw you did this as a blog. so it cant be added to collections ! transfer this to a project or you wont be included in a collection.

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

 Nothing wrong with a "dual shop" setup, you can keep the truly messy stuff down below and out of your way.

Had to smile seeing a shop with nice wall paper and drapes!
Certainly looks like it will be a great place to work.   
Pottz : Thank You! There are no obstacles, only challenges...
I was not aware that "Shops" belonged in the project category... It seemed more appropriate as a blog, because it is still a work in progress, and not in a completed state
SplinterGroup : Thank You as well! My Shop in my Manchester apartment took up most of my 2nd bedroom so it's not without precedent to Woodwork in a house setting (at least for me)
It has much to recommend it!
If I'm stuck or make a mistake, Coffee or a Sandwich are readily available while I re-group...
Also, if I can't Sleep or have inspiration, the Shop is always ready and waiting...

Mike, in Concord, NH - A candle loses none of its flame by lighting another candle...

were all doing it as a project so it can be put into a collection so when someone wants to see shops there all together. im doing one and so is steve. even as a project you can edit whenever you need to. so if you want just transfer to a project and we can include you ?

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.