miniature

Let’s make one of the wheels! It’s the wheel at the bottom of the spindle.  [image.png] [image.png] I made the rims on my CNC  [image.png] [imag...
This is a repost from LJ. So I can continue the series.  After building a new woodworking workshop last year I was searching for a new project to ...
Next i'm going to make the gear for the screw [Image] the main part is made of elm, the arms are made of oak and the teeth are made of holm oak (...
  After finishing “the box” containing the windmill and the ditches I added the landscape using insulation foam. (PUR)[IMG_20210730_142921.jpg]  Th...
This small mill has two doors. This is done so the housing is accessible even when the wings of the mill are turning in front of the door. [Image] ...
Last part was a very simple part. Now lets make the most difficult and challenging part of this mill: the "schroef" or "vijzel". A Archimedes screw...
The first thing to build is the base of the underpart of the windmill. It is made up of 8 pieces with lapjoints to make a octagon. It is called the...
[Image] Just some pictures of putting all the parts together [Image] Lower end of the post fitting the "onder tafelment" [Image] Top end of the ...
The "boventafelment" is also anchored on the beams with 4 metal anchors. On the drawing these are placed on the outside. But I want to be able to t...
At the top of the lower house of this windmill there is a round flat part where the top of the windmill rests on and that makes it able to smoothly...
After finishing the kokerbalken en korbelen the tube can be fitted [Image] Measuring the placement of the tube [Image] Cutting the recess [Image]...
Having finished the "onder tafelment" and the "boven tafelment", now I will make the posts, and because the shape of the underside of this windmill...