Spinnekop #2: Onder tafelment


This is part 2 in a 32 part series: Spinnekop

The first thing to build is the base of the underpart of the windmill. It is made up of 8 pieces with lapjoints to make a octagon. It is called the "onder (under) tafelment"

The windmill was made off oak and I will use the same material. After making some strips of 15 by 6.5 mm I made the lap joints on the table saw

And so I finished the "onder tafelment"


Looks perfect. Well done.

Andy -- Old Chinese proverb say: If you think something can't be done, don't interrupt man who is doing it.