Share your craft projects
Make new craft buddies
Ask craft questions
Blog your craft journey
I'm team "A"
B is too deep IMO, If you apply any finish that darkens, the exposed end grain around the plugs will probably become darker as the grain will absorb more that the face grain.
"A" could be set slightly deeper, just enough so the curves on the corners are just above the hole.
Of course that is based on the G&G style, plenty of places where the more flush "B" is appropriate.
B is too deep IMO, If you apply any finish that darkens, the exposed end grain around the plugs will probably become darker as the grain will absorb more that the face grain.
"A" could be set slightly deeper, just enough so the curves on the corners are just above the hole.
Of course that is based on the G&G style, plenty of places where the more flush "B" is appropriate.
