MrRick

There are so many ways to sharpen a card scraper but it doesn't have to be "Rocket Science" like so many people make it. Here's how I do it. [ima...

This is the finished Inlaid Dovetails. Keep in mind this is only one corner of a box! When doing a complete box a lot of the steps can be done in t...

 First I marked up the pins positions using the tails per Fig 13. Next I set my marking gauge to account for the rebate on the tails board in Fig 1...

 The critical step for inlaid dovetails is cutting a rabbet 1st on the tails board ( inside face ). For inlays it is mandatory. The depth of the ra...

 First I milled up and squared all pine  and cedar stock. I am using pine for the two main boards and cedar for the inlay. Initially I cut each to ...

  This is a tutorial on how I make “Inlaid Dovetails” sometimes referred to as double dovetails.  You can make them what I call in Fig. 1) “Tail Ou...