3-Arm Kerfing Plane

I will keep this blog entry brief (in case the baby wakes up and I have to run). I have been working on a new kerfing plane. For background on wha...

I am no stranger to saws. American push saws. I had never used a pull saw and to be quite honest, I had never even heard of one until 2020. I bough...

This plane is going to need a body, or carcass if you will. Something to hang the blade off of, optionally provide a handle, and allow for the 3 ar...

Hi, my name is Devin, and I am patient, diligent, and goal oriented. That opening line should preface the announcement that on the eve of the 2-yea...

Picking up where we left-off in the previous post in this series, where we had a look at the physical materials (the wood, fasteners, rods, bolts, ...

I sent an e-mail to someone that I admire. He responded, which is amazing. His response was short and sweet: Good stuff!   Thanks for sharing. B ...

These are words I tell myself in the throes of the process: Any fool can put something together. It takes a special kind of fool to design somethi...

My town has a store that only sells imported Japanese hand tools. I only recently heard about it this year, but I wouldn’t doubt it if it has been ...

I released the plans for the 3-arm kerfing plane last year  https://hub.shapertools.com/creators/5ff39ec0f861b00010201ece/shares/6508e5c0477e18160...