windmill oak article miniature

Let’s make one of the wheels! It’s the wheel at the bottom of the spindle.  [image.png] [image.png] I made the rims on my CNC  [image.png] [imag...
The first thing to build is the base of the underpart of the windmill. It is made up of 8 pieces with lapjoints to make a octagon. It is called the...
Last part was a very simple part. Now lets make the most difficult and challenging part of this mill: the "schroef" or "vijzel". A Archimedes screw...
This small mill has two doors. This is done so the housing is accessible even when the wings of the mill are turning in front of the door. [Image] ...
  After finishing “the box” containing the windmill and the ditches I added the landscape using insulation foam. (PUR)[IMG_20210730_142921.jpg]  Th...
Next i'm going to make the gear for the screw [Image] the main part is made of elm, the arms are made of oak and the teeth are made of holm oak (...
To support the tube (koker) and to give strength to the lower part of the windmill there are "kokerbalken" (girders?). They form a bent together wi...
[Image] Just some pictures of putting all the parts together [Image] Lower end of the post fitting the "onder tafelment" [Image] Top end of the ...
This part of the mill is called "koker" and can be translated as tube. It is part of the bottom part of the windmill and allows the main drive shaf...
The "boventafelment" is also anchored on the beams with 4 metal anchors. On the drawing these are placed on the outside. But I want to be able to t...
To add more stiffness to the construction of the housing of the windmill there is additional bracing. These crosses are not in the fields where the...
At the top of the lower house of this windmill there is a round flat part where the top of the windmill rests on and that makes it able to smoothly...