Share your craft projects
Make new craft buddies
Ask craft questions
Blog your craft journey
Eric - the "Loft"
4402 posts
and
69 followers
in over 1 year
in over 1 year
More from Eric - the "Loft"
Coffee Grinders (Round II)
Round II on Coffee Grinders, this time I made some easier boxes by making them square, all Pecan, measuring 6-1/2" square and 4-1/2" high. I used Pecan splines in the corners of the box and the drawer, then a matched grain front panel for the drawer face. The inside of the box has drawer guides and a magnet to hold the drawer closed. Those guides also gave me something to glue the little side pieces to.
I used the same bamboo pins to glue the top and bottom panels on. I turned the little knobs with a tenon to glue into the drawer face. All was finished with Danish Oil followed by multiple coats of Minwax Wipe on Poly.
Thanks for looking and comments are always welcome and appreciated.
I used the same bamboo pins to glue the top and bottom panels on. I turned the little knobs with a tenon to glue into the drawer face. All was finished with Danish Oil followed by multiple coats of Minwax Wipe on Poly.
Thanks for looking and comments are always welcome and appreciated.
Main Street to the Mountains
10 Comments
Another nice set!
Ryan/// ~sigh~ I blew up another bowl. Moke told me "I made the inside bigger than the outside".
these are real nice But i love the other style better GR8 JOB 😍😎👍
*TONY ** Reinholds* ALWAYS REMEMBER TO HAVE FUN
Ryan, thanks. I have a few of them now, adding to the pile. I still have 5 left, but I'll wait a bit on them.
Tony, thanks. I like the other ones better too; these were easier though.
Tony, thanks. I like the other ones better too; these were easier though.
Main Street to the Mountains
nice grinders my friend.
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
Cool project Lofty....
But for one that avoids hand tools,
But for one that avoids hand tools,
If your first cut is too short... Take the second cut from the longer end... LBD
Wood and rustic style metal are just astonish
...woodicted
Nice retro looking coffee grinders.
Pottz, thanks. And the mechanism is a ceramic grinder, which is better than the old style.
LBD, thanks. Grinding your beans by hands makes the coffee taste better with the anticipation and brewing it in a French Press.
Ivan, thanks. The wood mixed with the metal goes well together.
OldTool, thanks. The Retro look is coming back is some areas.
LBD, thanks. Grinding your beans by hands makes the coffee taste better with the anticipation and brewing it in a French Press.
Ivan, thanks. The wood mixed with the metal goes well together.
OldTool, thanks. The Retro look is coming back is some areas.
Main Street to the Mountains
They look cool - how much coffee do you drink ;)
I'll admit, when I saw it was Round II, I was expecting the cylinder ones.
I'll admit, when I saw it was Round II, I was expecting the cylinder ones.
Mike, I usually drink about pot a day. As for cylinders I'm still thinking about those.
Main Street to the Mountains
More from Eric - the "Loft"
