OFFICE ACCESSORIES AND MOBILE PHONE STAND

Mahogany made stand for mobile phone and various office accessories. Dimensions 31x21x16cm. I closed back side with 4mm beech plywood, with small additional space for glasses or something else that fit.

Squared holes on front panel I cut on scrollsaw and 12mm holes I drilled by hand drill using wooden template wtih 45 degree predrilled holes. It wasn't done on drillpress since object was to high for drill bit - I couldn't lowered drillpress so low. Compartment were made with elements I glued from back side.

Finish, three layers of non glossy spray laquer.