SCROLL SAW BOWL

353
26
I have become interested in Scroll Sawing...I am only a very raw novice. But it is fascinating how a flat and square piece of wood 3/4inch thick. can be cut into rings, in this case a 28deg angle.  Then when stacked and glued it becomes a Bowl.
My cutting is not real accurate but if the cutting is fairly reasonable, I can sand out the mistakes so it looks presentable.
The Wood is Australian Silky Oak.  I am from the State of Queensland, so it would most likely be Queensland Silky Oak.
Regards ..... Cliff.

26 Comments

Cliff,

Interesting.  Pretty cool bowl.

Petey

Nice work on the bowl, Cliff. I'll have to try that some day...the shapes are limitless !!!!!!!!!!!!!

Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day

Great looking!   Nicely done.  Like the table cloth also.

Ron

Nice! Can't do that on a lathe!

The Other Steven

I can see someone with a lathe, turn a bowl thick, then use an arbor type grinder to flute the inside and outside to get the undulations. I think you scroll work would be easier and the results are limitless.

Good stuff to file away in the noggin! Nice!
looks great. ive got a scroll saw but havn't used it in a long time. maybe i need to ?

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

These are fun, and satisfying in that you can make them pretty quick.

In case you aren't aware, there was a guy named Steve Good, he recently passed, but his old site has a lot of patterns, many are bowls, and baskets. All of the plans are free to download, or you can do it like I always have and leave a Paypal gift when I download some new ones. Recently a guy Steve knew has taken the reigns, since Steve has passed. Link for the site is here. If you sign up for the emails, he is sending out new plans pretty often. 

https://www.stevedgood.com/catalog/
Nice job. That's very interesting, I've never seen that done before.

.................. John D....................

Petey,
Thank you...Regards...Cliff.
Thanks Jim...Scroll Saw Bowls are fun to make...Regards ... Cliff.
987Ron... Thank you Ron...The Tablecloth is very traditional like they had in old cafes years ago.
Regards .... Cliff.
Dark_Lightning 
Thank you...They are fun to make.   Regards .... Cliff.
SplinterGroup.
Thank you...It is an interesting project..To start with a flat Board and a Bowls emerges...
Regards ...... Cliff.
Hi Pottz.. Give it a go.. You would enjoy it...
Regards ...... Cliff.
GeorgeWest
Thank you.  Also thank you for the information about Steve and his Patterns/Plans and the link to his site.
Regards ...... Cliff.
awsum55
Thank you ..... Cliff.
I turned bowls years ago, when I was in a medical holding company in the Navy, after surgery for a ruptured appendix. I bought some 14" wide 4/4 mahogany from McBeath's in Oakland. I cut out smaller diameter bowls with a scroll saw and ended up with several bowls, progressively shorter and of smaller diameter. Your method yields tapered bowls from a single board. Either way, efficient use of lumber.

I remember some guy at LJs who made bowls like yours, but just round.

The Other Steven

Very nice work, this is well done and looks great.
Cliff,

I have never seen that before.  Looks great.

daveg, SW Washington & AZ

Dark_Lightning.
Thank you.  I hope you are well now since your Surgery.  Bowl making from a single board is quite fascinating, to see a bowl emerge is amazing....I am yet to achieve cutting and gluing the rings without too much sanding....so far a lot of sanding.  So I need a lot more practice yet.
I agree, It is a very efficient use of timber.
Regards ...... Cliff.