Craftisian

James

11 posts and 5 followers
in over 9 years
0
0

Cooler Box Sport Edition

1915
12
Cooler Box Sport Edition
Cooler Box Sport Edition Cooler Box Sport Edition

Same cooler box but with the sport plate. I advertised once for about 8 hours and then word of mouth has sold them ever since. I never have any in my shop for very long.

James

cooler box miter saw band saw air compressor air nailer

12 Comments

Thorreain commented almost 9 years ago

Very nice.

CHRIS, Charlottetown PEI Canada. Anytime you can repurpose, reuse, or recycle, everyone wins!

a1jim commented almost 9 years ago

Totally unique design.

woodworking classes, custom furniture maker

Jeff Vandenberg commented almost 9 years ago

Really cool. How did you finish off the drain pipe on the inside of the coolee? Do you have any pictures of that? Reason I asked is I have been contracted to build one and im trying to figure out the best way to do the drain.

Jeff Vandenberg aka "Woodsconsin"

James commented almost 9 years ago

Thanks for the comments. The drain is hooked up with 1/2 inch pvc pipe and 90 degree corners. The sillcock valve is attached with a male end pvc joint. All joints are glued with abs solvent cement. Hop this helps Jeff. Sorry I don’t have a picture.

James

Mike40 commented almost 9 years ago

Nice work James.

Mike, an American living in Norway

Wood-Chuck (Bruce) commented almost 9 years ago

Great job
Love the weaved look. How did you accomplish that?

WC (Bruce)

James commented almost 9 years ago

The weave pattern is a 1×2 cut free hand on a band saw. Lay the 1×2 on the wide edge cut down the middle to create a wavy pattern. Sand the cut edge and then glue and nail it to the plywood lined box.

James

Wood-Chuck (Bruce) commented almost 9 years ago

Very cool, thanks for the reply.

WC (Bruce)

More from James

Barnwood cabinet - Project by James Headboard Bench - Project by James Barnwood Welcome sign post - Project by James Barn Wood Wine Rack - Project by James