Hairy's recent post of a wood storage project has me thinking about my shop. As a resource for inspiration and ideas, please share your storage options.
Right now I have a "rolling cart" (think I used Steve Ramsey plans) plus vertical storage for long boards. Thinking of shifting to horizontal for the latter - thinking that is "better" to avoid bowing.
Current long boards
Rolling cart when first built - it is much more disorganized now!
Petey- that's so neat! Do all of your lower or do you have to use a ladder for the one? My shop is in a pole barn with no ceilings. I'm thinking of how to attach supports for horizontal storage on a interior wall. Not sure of the inner construction as it is there to separate our workout room. 🤔
I looked at Monster Rax and they look like a great solution in the right setting.
Mine is made of 2" X 3" X 8' lumber and 1/2" plywood, nailed together, above what was originally my workbench. That now has storage cabinets on it with a narrow strip left for some kinds of work.
Flat storage is great for the wood and maximizing density, but a bummer to sort through. Storing upright really has little chance of affecting the wood if it is truly vertical. What can cause problems is having shorter boards leaning against the longer boards. I'd store vertically if I had the ceiling height, definitely need some chain and hooks up top to keep the boards from falling over.
definitely need some chain and hooks up top to keep the boards from falling over.
So, I was doing some rearranging of my long boards and thought I should look at adding a bungee or strap to a group of three extra tall boards that aren't behind my other stand (the other boards don't have much area to fall). As I turned to go look for a solution, the one new maple board picked that moment to fall forward. As I startled, looking back, I got knocked on the side of my forehead. 😲 Glad the board wasn't too wide or thick! Rather ironic that exactly what I was trying to avoid had immediately happened. 🙄 Have some temporary "holds" in place now and will need to get a better solution that is secure, but still easy access.
Maybe build a vertical rack? Just black pipe sections on flanges sticking out from the walls at the studs, or whatever spacing you want if you use a ledger board. The pipe sections don’t need to be more than probably 18”-24” long, maybe shorter if you know you aren’t going to store wide pieces of lumber.
That would greatly increase your volume of storage without taking away too much depth, and it’s cheap to trial.
Ryan/// ~sigh~ I blew up another bowl. Moke told me "I made the inside bigger than the outside".
Most of the smaller wood selling places around me have bay like storage. It offers full support, so never any bend, and due to weight of the "stack" it doesn't twist at all. I copied the design most often seen, it will carry great weight, cost little to build. Well it used to, since Covid pricing any wood is expensive now. As you can see I opted to go 3, 4' x 8' bays wide, and I have 12' ceilings, so I went up a bit. Obviously you can make the racks narrower, and just a single bay of them is doable. Much of the load bears on the back wall, and a heavy duty attached bearing beam needs to be attached to a solid/sturdy wall. The legs are 2 x 12, and they need to bear on a solid floor. Concrete is best.
The downside of it is, if you want that last bottom board, well it is a great cardio vascular workout, but if you would rather be woodworking, a large PIA.
This is moved partially in, and during drywall so it's somewhat covered, but it kinda gives you an idea. Now it's so crowded in there you can sometimes catch glimpses of wood. But it's a lot more filled now, than this pic. Probably around 5,000 bd/ft anyhow.
At the place I buy a lot of wood, and they sell millions of bd/ft a week, rather than a thousand or two. They have straight walled bins, and stand up all of their stock pulled for their "Showroom" and walk in wood buying area. I have to say they move inventory, so I am not sure how long any one board may stand there, but in over 30 years of buying from them, I have never had a warped board. In their warehouse all wood is bunked, and bundled just like the huge stack of 2 x 4's at the Borgs, and they move it all around with huge forklifts. I'm not rich enough to pull that off though. Most of their serious biz is bunks of lumber, loaded straight to semis, and sent all over the world.