Craftisian

Ross Leidy

588 posts and 21 followers
in almost 2 years
0
1

Wegner-Inspired Deck Chair #9: Seat Frame Mounting

337
1

This is part 9 in a 10 part series: Wegner-Inspired Deck Chair

The rear edge of the seat frame has 4 loose tenons glued in place.  The protruding tenons dry fit into corresponding mortises in the rear stretcher to support the rear of the frame.   The side rails of the frame are screwed to the front stretcher, with a 1" diameter UHMW spacer to place the frame at the desired height.





With the exception of finish and proper cushions, the chair was complete!
chair wegner ge-375 decking

More from Ross Leidy

Hans Wegner's "Bukkestolen" #4: Trimming legs to shape Hans Wegner's "Bukkestolen" #3: Arm finger joints Hans Wegner's "Bukkestolen" #2: Leg finger joints Hans Wegner's "Bukkestolen" #1: Introduction Parquetry in a Stained Glass Pattern #11: Wrap-up
RSS