Craftisian Blogs

[IMG_0856.png] Boy and Girls,   Prior to my Rockler Air Pods article, this was my initial endeavour, which in turn was my first grab for an alterna...

[IMG_0748.png] Boy and Girls,   Another pointer to an existing review/project of an item as I would colloquially classify in the Clamp genre.   Rec...

[IMG_0764.png] Boys and Girls, It'd be remiss of me not to mention my favoutite clamping system which is the Fe$tool VAC-SYS. Unfortunately it is...

So, Same process for the legs, I'll skip by fast. Trim the excess, leaving about 1/16".... [IMG_8988.jpeg] ... for the router with a flush trim bi...

[z01.jpg] Boys and Girls, I have previously reviewed this clamp in the past, however, I have included the link here as it follows the progression ...

[12.jpg] Boys and Girls, I have previously reviewed this clamp in the past, however, I have included the link here as it follows the progression o...

After 4.5 hrs in the press, this is what greeted me when I pulled-out the panel.  At first I thought the ripples were the result of too much glue, ...

Before tackling the remaining steps on the large panel, I made a small test panel to experiment with.  I didn't really have a plan for the layout, ...

Tonight I finished the top-left quadrant.  No hiccups, fortunately.  I had left space for the "string" for the yellow balloon, thinking I might p...

I shifted the cutting mat down to work on the bottom portion and put the whole thing on top of some salvaged plywood shelves for full length suppor...

So, just to be clear, there is nothing earth shattering in all this yet. Just posting the process. Kinda like Bandit "over there" telling what he w...

Just some more progress photos as I completed the upper right quadrant. [20240329-IMG_8956.jpg] [20240329-IMG_8957.jpg] [20240330-IMG_8958.jpg] [2...