oak

Work Bench Build #3 Wood Selection And Layout I got to use the bench to build a bench right away to lay out the boards for the top. But I removed t...

This is a repost from LJ. So I can continue the series.  After building a new woodworking workshop last year I was searching for a new project to ...

A slow day again, only an hour work, but I managed to install the face Vise. I am using the Vise on the end of the bench instead of the front face....

This small mill has two doors. This is done so the housing is accessible even when the wings of the mill are turning in front of the door. [Image] ...

Next i'm going to make the gear for the screw [Image] the main part is made of elm, the arms are made of oak and the teeth are made of holm oak (...

The first thing to build is the base of the underpart of the windmill. It is made up of 8 pieces with lapjoints to make a octagon. It is called the...

  After finishing “the box” containing the windmill and the ditches I added the landscape using insulation foam. (PUR)[IMG_20210730_142921.jpg]  Th...

Last part was a very simple part. Now lets make the most difficult and challenging part of this mill: the "schroef" or "vijzel". A Archimedes screw...

The "boventafelment" is also anchored on the beams with 4 metal anchors. On the drawing these are placed on the outside. But I want to be able to t...

To add more stiffness to the construction of the housing of the windmill there is additional bracing. These crosses are not in the fields where the...

This mill has a concrete base and brick stone walls. According to annotations on the drawing the mill wasn't built like this. It had a stone founda...

The Water that is pumped by the mill has a exit called "waterloop". It houses a door to keep the water on the high side of the mill out (like a hor...