workshop benches

Like many hobby woodworkers I have always felt that my shop was too small. It certainly isn’t large at 228 sq.ft. My growing dissatisfaction made m...

For over 15 years now I have been working out of my garage as a workshop without a carpenters vise or a dedicated carpentry space. The shop has pro...

Well ladies and gentlemen im feeling much better again. And its Hammer time. Time to start making up time lost from being sick. First, I just wante...

Well it’s Valentines day and I only got to work a few hours today. So I ripped my frenchcleats today. Im using the back of the workbench for storin...

The building of the tail vise is not an easy accomplishment. I started to build the vise when I was invaded by the daughter and grand kids carving ...

My workshop has served my family well. Now it is time to dedicate some space to woodworking. It can accomidate about 10 people in comfort watching ...

With the legs already cut to length its time to glue them up. I have the joinery drawn out on the top roughly so that after cutting the boards the ...

I have just finished drilling the pilot dog holes into the top boards that I have vises for. This will allow me to have a nice straight batch of do...

Well im making some head way. I did the reinforcement on the bottom beams because of inertia. I have the face frames done, & one on now. I did ...

Work Bench Build #3 Wood Selection And Layout I got to use the bench to build a bench right away to lay out the boards for the top. But I removed t...

We on Friday the 30th of January I started on my Workbench/ Outfeed Table. I’ll be updating and showing pictures as I go. So far I have the base st...