Epoxy Inlay Wall Hanging

Another previous project…this was made for a condo in Maui.
_______________________

This is an epoxy inlay project for a wall hanging piece I made. Cherry, Walnut strips and Maple stripes make up the panel.

The inlay pockets were cut with a Shaper Origin, than back filled with various colors of epoxy. Sanded up to 320g to get the epoxy to show well, then I back sanded the wood as well as I could to 220g.

Danish oil to add some depth. I used the cherry tinted oil on the Cherry wood and Natural color oil on the Maple and Walnut.

Then shellac, then several coats of lacquer and hand buffed.