Share your craft projects
Make new craft buddies
Ask craft questions
Blog your craft journey
Pottz
15555 posts
and
99 followers
in about 2 years
in about 2 years
More from Pottz
mu ultimate miter saw bench
Project Information
well this is something ive been wanting to build for a long time but just could not find the room,then I realized why not take what I already had and reconfigure to make it work and this is the result.the center cabinet was my original miter saw stand,the two cabinets on the sides were joined together as a large rolling tool cabinet,the cabinet is gone but the drawers were recycled in the new side cabinets to create this new unit.the boxes are melamine,the wood used is clear doug fir.all drawers are on ball bearing glides.the bench top is Masonite.the fences are melamine with rockler t tracks and flip stops secured with toggle clamps so they can be repositioned or removed.dust collection is marginal with this saw but better than nothing.the finish is a stain with oil finish.measurements are 7'7" long 24" wide 43" tall,i like tall benches my back is not getting younger.it sits on 4" wheels so I can move easily. due to the recycling my total cost was less than 150 bucks. well after 5 yeras of use im still happy with this setup and wouldn't change anything.
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
32 Comments
Not bad Pottz, it's always nice to have a good runout table to each side.
Main Street to the Mountains
And you have a go at my Fe$tool. The timber alone would be worth more than my entire Fe$tool collection.
If your first cut is too short... Take the second cut from the longer end... LBD
not even close ducks. you forget most of this was recycled and i work at a lumber yard.
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
pottz
commented 4 minutes ago
new
not even close ducks. you forget most of this was recycled and i work at a lumber yard.
And I shoplift!
If your first cut is too short... Take the second cut from the longer end... LBD
Nice layout. Looks good.
Ron
thanks ron
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
That is a funny, unusual color for a Bosch. Hmmm? Wish I had that much space.
No Bees. No Honey. Bees Lives Matter
plenty of GR8 storage in this very nice stand GR8 JOB 😍😎
*TONY ** Reinholds* ALWAYS REMEMBER TO HAVE FUN
Wow, pottz, that looks great!
You work at a lumber yard?! That must mean you can send free samples to all your Craftisian friends, right? :-)
You work at a lumber yard?! That must mean you can send free samples to all your Craftisian friends, right? :-)
sure ron you want the 2x4x6" or the 2x6x12" ? i do get to buy everything we sell at cost and get it taken out of my check before deductions and no sales tax !
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
Good looking, it definitely takes a little space up. Good job. Mike
thanks mike. it does, but it works !
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
Ron Stewart
commented about 4 hours ago
new
Wow, pottz, that looks great!
You work at a lumber yard?! That must mean you can send free samples to all your Craftisian friends, right? :-)
Not only that, but I'm sure we'll all permit pottzy to pay for the postage.
If your first cut is too short... Take the second cut from the longer end... LBD
oh hey easy duckie,nobody mentioned free shipping !
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
pottz
commented 11 minutes ago
new
oh hey easy duckie,nobody mentioned free shipping !
Nobody mentioned you're such a nice guy either... both are given... anyway, you don't buy Fe$tool... you must be a mega multi-zillionaire.
If your first cut is too short... Take the second cut from the longer end... LBD
nice guy .....thats such fantasy i think. now i do have some festool ! a domino and a sander so far ?
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
If I had a miter station like that I’d end up filling the beds up with crap and I couldn’t use it! But I don’t really have the room anyway. Someday! Nice job Pottz…
Ryan/// ~sigh~ I blew up another bowl. Moke told me "I made the inside bigger than the outside".
thanks bud.
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
That's how is should be done, Lar.
Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner
pottz
commented about 5 hours ago
sure ron you want the 2x4x6" or the 2x6x12" ? i do get to buy everything we sell at cost and get it taken out of my check before deductions and no sales tax !
I don’t know if you’re serious or not about the first part, but I was just messing around.
That’s a nice perk—makes experimenting with different species (and building projects) more affordable.
commented about 5 hours ago
sure ron you want the 2x4x6" or the 2x6x12" ? i do get to buy everything we sell at cost and get it taken out of my check before deductions and no sales tax !
I don’t know if you’re serious or not about the first part, but I was just messing around.
That’s a nice perk—makes experimenting with different species (and building projects) more affordable.
More from Pottz
