This Classic Ogee plane was originally made and worked well but a little difficult to use because I originally made it as an "unsprung" plane. It is now a "sprung" plane. I reworked it improving the fence by lengthening it on bottom left side and also lengthening the depth stop on bottom right side. On the nose I scribed in the "Spring" lines.
This is how the user tilts the plane while using. You are looking at the nose. The fence is on the right and the depth stop is on the right. It now works very very well! Here are some photos of the profile it makes. The first photo shows the actual profile it cuts.
Here, I've cut the Ogee profile on top and bottom along with some beading.
On top I added a strike button Here's a bottom view