Workbench / Outfeed Table #1

20140 views
11 entries

1 Workbench/ Outfeed

We on Friday the 30th of January I started on my Workbench/ Outfeed Table. I’ll be updating and showing pictures as I go. So far I have the base st...

2 Workbench/ Outfeed #2

Well after a few days off I started back up on the workbench/outfeed table. I have the cabinet carcases done except 1. I have two 12"×18", (1) 18"×...

3 Continued Build of Workbench

Well I have all the cabinet carcase’s done and, all in line. I cut the top that will be attached to all the cabinet carcases to aid in weight distr...

4 getting further

Well im making some head way. I did the reinforcement on the bottom beams because of inertia. I have the face frames done, & one on now. I did ...

5 Workbench/ Outfeed continued

Well it’s Valentines day and I only got to work a few hours today. So I ripped my frenchcleats today. Im using the back of the workbench for storin...

6 It's Hammer time

Well ladies and gentlemen im feeling much better again. And its Hammer time. Time to start making up time lost from being sick. First, I just wante...

7 Doors all glued up

Well the doors are all glued up and routed. I sanded them to 150 but I qant to go to 180 before putting on the tung oil. Then im heading to slot th...

8 Doors, Drawer Fronts & Face Frame

Hello ladies and gents, well I’ve been busy making Doors, drawer fronts & tons of sanding. Well after sanding, I put on two coats of tung oil w...

9 Drawer Boxes

Well hello my woodworking buddies. Let me tell you things have been so crazy around here the last week & 1/2. So many disappointments have hit ...

10 Drawers Installed

Well the drawers are installed. Need to hang two more doors and make the huge pull out drawer and install that yet.