Share your craft projects
Make new craft buddies
Ask craft questions
Blog your craft journey
Jeff Vandenberg
1350 posts
and
51 followers
in almost 10 years
in almost 10 years
Workbench / Outfeed Table #1 #7: Doors all glued up
This is
part 7
in a
11 part
series:
Workbench / Outfeed Table #1
Well the doors are all glued up and routed. I sanded them to 150 but I qant to go to 180 before putting on the tung oil. Then im heading to slot the top of the carcase’s to accept the lag bolts to attach the main top. Then moving onto sanding the face frame and going to finish the interior of the carcases before I install the drawer rails. Here are the pictures of the doors 
Space balls installed to controll expansion and contraction of panel also t aid in no rattle. 
Picture above sanded to 150 + edge profiled
Again
Picture above all sanded to 150 and edge profiled.
Below is my best friend he hangs with me the whole time im in the shop.
Jeff Vandenberg aka "Woodsconsin"
6 Comments
Great work on the doors. Its coming together very nicely. Will be great when your done
kevin's kreations
Thanks Kevin
Jeff Vandenberg aka "Woodsconsin"
Nice work. Looking great.
Losing fingers since 1969
Very nice work Jeff. I have a similar wood recycling friend sharing my shop when she isn’t allowing me to drive her in the truck. But she’s on the down swing this winter, 14 years for a large dog is a long time. I love your choice of woods for the doors, great work.
CHRIS, Charlottetown PEI Canada. Anytime you can repurpose, reuse, or recycle, everyone wins!
Great work Jeff. The doors are outstanding.
I am sure the wood inspector check them all including the soundness of the wood and gave you an A+; great looking dog.
Abbas, Castro Valley, CA
Lol… yeppers, the inspector is chewing on a part of the door that failed. (Truth). Lol.
Yes Thorreain 14 yrs is a long time I hope she’ll hang in there as long as she can. Its really hard when that time comes.
Thanks for all the comments
Jeff Vandenberg aka "Woodsconsin"
