17 Comments

That’s nice!

that is really cool

Really nice Tony, I know he loved it.

Fantastic!

Wow, It’s cool! :)

Great job!

Very cool! What young boy wouldn’t like that!

Thats so cool!!!! Really nice job well done!

really good job nice work

This is awesome! Very well done. I do have one question…how did you get your mitered edges to stay true when you drove those screws in? I’m making a platform bed right now, I mitered the edges and when I used some scrap wood to make sure the screws would work well every time I tightened them down the corner would slip and end up out of line. I’m quite new to woodworking this is really a first project i’m doing for myself, thanks for any help you could offer!

Bake8c, what i did was drill a pilot hole, and then drove 2 screws in, but not all the way, then drove 1 screw in on the opposite side, i did drill this one in almost all the way, came back and tightened the other 2 then finished off by tightening the single on the opposite side. All while clamped tight between 2 scraps. Hope that helps! Good luck with your build.

Waay cool bed ,nice bed.

How can I get the measurements for the bed?

How can I get the measurements for the bed?

I didnt really draw this out, just kind of built it. If you google the bed size you want i made the frame 2" oversized of that, then made the headboard in proportion to that.

Amazing! My son wants something similar, I love the ideas of the underlighting as he won’t sleep without a light on.
I did have a question though; where did you put the legs for the frame? Your finished product looks raised from the floor a bit :)

Kveenhof, if you look at the 9th pic (pic between the mitered corner and the can of paint) the on the interior long runners you can see the legs come off of that and then have a board that run parallel to the short side that sits on the floor for added balance. I wanted the bed to seem like it was floating so i tried to put the legs as far in as possible, but still keep it from leaning if a kid stood on the edge.