Craftisian Blogs

The next step was to create a set of router templates for some of the pieces.  My original plan was to print paper templates, glue them to MDF, and...

Just a quick update to show the top in place and the installation in the kitchen by the 18C dog food cabinet. It will live here under a tablecloth ...

 1911 delivery truck I found some cool old plans to play with so trying the 1911 Brush Delivery Truck' I've built this style truck before but a m...

Boys and Girls,   This may be ho-hum to most, however, I received enough feedback to the original post at LJ on 29th. May, 2018, that made me real...

Not everything I do turns out great and this is the story of one of those occasions. A few months before the lockdown, I was driving through the Ne...

Well, the last exercise on the outer surface was a mistake. I should have left well enough alone. There's way too much material removed by drilling...

You may have seen the preparation involved to construct the Double radius feature at the back of the cabinet top. Here it is sitting in place. [IMG...

Well, I said I would post again when the veneering was done. It took a little longer than I expected because I decided to add a little marquetry to...

Cut out the center stile and added a couple of wide pull out shelves. Pre-finished 5/8" BB with 1/2" melamine bottom, rabbeted in. 1/16" dado and b...

 First up No its not a new fangle-dangled revolutionary string jacks? Its a simple platform I made to maneuver projects on in and out of the gara...

Thought I was done with the top surface, but I checked my references and discovered I forgot something. There’s a narrow recessed area on the outer...

Boys and Girls,   Another cheap, but non-Chinese, import from what was released on the 7th. January, 2020… sorry about the long winded date, but I ...