Craftisian

awsum55

760 posts and 22 followers
in almost 2 years
2
2

Another type of puzzle box.

664
11
Another type of puzzle box.
Another type of puzzle box. Another type of puzzle box. Another type of puzzle box.
The way this puzzle works is you dump the pieces on the table and tell the person they have to get all the pieces back in the box and be able to close the box. They try and it seems easy. Then you pull the last block out of the top (it has a hole to push the block out) and tell them "Sorry I forgot to give you this one".

.................. John D....................

11 Comments

Pottz commented almost 2 years ago
interesting john.

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Eric - the "Loft" commented almost 2 years ago
Pretty box, and looks interesting. Does the top piece actually fit inside the box with the lid on?

Main Street to the Mountains

LIttleBlackDuck commented almost 2 years ago
👍,🦆...

If your first cut is too short... Take the second cut from the longer end... LBD

awsum55 commented almost 2 years ago

Eric - the "Loft"
Pretty box, and looks interesting. Does the top piece actually fit inside the box with the lid on?

Thanks guys, and yes Eric the lid must go on.

.................. John D....................

LIttleBlackDuck commented almost 2 years ago
Did you get pottzy in the box swap and letting the cat outa da bag?

If your first cut is too short... Take the second cut from the longer end... LBD

majuvla commented almost 2 years ago
Nice....interesting...

...woodicted

Eric - the "Loft" commented almost 2 years ago
LBD, Yes Pottz has finally signed up.

Main Street to the Mountains

awsum55 commented almost 2 years ago
LIttleBlackDuck
Did you get pottzy in the box swap and letting the cat outa da bag?
No, he wanted me to join in, but I'm working on my lathe skills and I'm obsessed with it. I'm just about finished with a open segment type bowl.

.................. John D....................

LIttleBlackDuck commented almost 2 years ago

 awsum55
 commented about 1 hour ago
new
LIttleBlackDuck
Did you get pottzy in the box swap and letting the cat outa da bag?
No, he wanted me to join in, but I'm working on my lathe skills and I'm obsessed with it. I'm just about finished with a open segment type bowl.

 "The Answer Is Blowin'n In The Wind" John D 

Send him a box anyway... he'll be chupped and you'll win a friend for life.  He'll probably come to your place and give some personal lathe lessons... he'll probably even turn that bowl for you.

If your first cut is too short... Take the second cut from the longer end... LBD

RyanGi commented almost 2 years ago
No, he wanted me to join in, but I'm working on my lathe skills and I'm obsessed with it. I'm just about finished with a open segment type bowl.
You know you can make boxes on the lathe, right? Think: nested, lidded turned boxes…and go…

Ryan/// ~sigh~ I blew up another bowl. Moke told me "I made the inside bigger than the outside".

Eric - the "Loft" commented almost 2 years ago
Round boxes with lids, they are fun to turn.

Main Street to the Mountains

More from awsum55

Walnut and Hedge Keepsake Box - Project by awsum55 One more money saving use for my laser - Project by awsum55 A Few Ideas For The Shop - Project by awsum55 Paying it back - Project by awsum55