Our park is opening a mini golf course and each of the 9 holes is sponsored by an activity in the park. I had to make an obstacle for the 8th hole for the wood shop so I modeled a band saw after the Grizzly saw in our shop. The saw had dew on it when I took these.
This saw was made entirely out of old 2x4's and 1/2" plywood with a little mesquite used for the upper blade guide and the knobs...and a real 1/4" band saw blade. It is finished with green stain and clear coated to help it last in the rain and dust storms out here in the low desert . My neighbor ,Wayne, did the laser work on the Grizzly signage and all the signs for the holes in the course.
Cheers, Jim
Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day
Thanks, Ivan and Rob!! It is screwed and doweled and can be taken fully apart if need be. Not sure where Pottzy is located but we'll be on the lookout for him
Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day
