Bird Houses

242
12
.I had some pieces of that real old cedar left and I wanted to give the sparrows a little more protection from the winter winds. I made these two Sparrow Hotels  for them!! I have 3 bird houses there now  and have room for 2 more between the bushes on the North side of the barn. I made them for sparrows because there are a ton of them around there. A funny thing happens when I run my vertical mill that is just inside the window on the North side of the barn. I looked out there 3 or 4 times now and when the mill is running, there are about 40 or more sparrows sitting all over the bushes looking in !!! They must like the sound of the motor !

These Sparrow Hotels are unfinished. I have a stainless hinge on the lid in the back and a copper angle to lock the front down. I can clean them out by raising the lid! I put vent slots near the top on the sides and drain holes in the bottom.  I had the lock miter bit still on the router table so all the corners are lock mitered and glued .  They are 6 1/2" x 6 1/2" x 12" high. I will mount them on steel posts next to the barn.

I want to thank Doug Scott for all the fine old cedar !!!!!!!!!!!
Cheers, Jim

Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day

12 Comments

nice hotels birdy homes GR8 JOB 😎😍👍

*TONY ** Denver * ALWAYS REMEMBER TO HAVE FUN

Nice bird houses! I saw somewhere that someone said that the government was using machines that look like birds to spy on people. I don't want any of what those people may be smoking.

The Other Steven

very cool jim !

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Nice Jim

I would want someone out side when you turn that machine on.  Find out where they are coming from. Be interesting to know.

Petey

Nice birdie boxes Jim. They usually end up falling into Forrest Gumps Box a chawklets thing. You hang em up, and never know what will populate them. I think hole size determines a lot. 
I'm sure your fine feathered friends are going to appreciate your kind efforts. Nice work.
Put them side by side for a Sparrow Suite.     Nice work.

Ron

Nice work.  you have beat me to a project I have looming.  My two bluebird hotels have some to their useful end and so I must replace them.  These are really nice and I like the use of the hinge and hasp for securing the top.   
Great stuff!

You should name one "The Ritz" and the other maybe "Motel 6" and see which gets the most business.
Thank you all for the nice comments!
Hi Nathan...maybe the have Flock cameras that can fly. That might be what is spying on my mill !!!!!!

Hi George. I think you are right on the hole size. I went with 1 1/4" and it seems to get sparrows in all the other houses. But, I was working on the other side of the yard and I heard this pecking and when I moved a bird flew away from the farthest West house. So I moved  over up against the oak tree nearest the barn and stood still.  The bird came back and pecked a little bit at the hole and then went inside. It was a red headed woodpecker. That peckerwood opened the hole to about 1 1/2".

Hi PapaDave, I have made some birdhouses with the back that comes off but this one is much simpler  .One screw to flip up the top! I grew up with the KISS principle.

Cheers, Jim

Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day

Nice Bird Boxes Jim...I like the name SPARROW HOTEL .....Regards .... Cliff.