Typical Stuff In The Shop

Building some small upper cabinets that will go above a couple of undercounter wine refers. The cabinets will have LED lights on the bottom and ins...

Here are the two cabinets that will have the lighting I mentioned in part 1. [20221203_112010.jpg][20221203_112018.jpg] I'm also making shelves th...

Putting a docking plug into a drawer.  I like the swing arm that houses the wires so the don't get out of control. They're expensive, but if the cl...

I think this is basic,  but will share for anyway. I have 4 doors. With the length of my stock, I can get 1 long and 1 short out of each rip. So I...

Just doing a little painting.  Not much,  some Floating Shelves, Doors and a Counter top [20230103_122152.jpg] After 2 coats of primmer and 1 coat...

Cut out the center stile and added a couple of wide pull out shelves. Pre-finished 5/8" BB with 1/2" melamine bottom, rabbeted in. 1/16" dado and b...

A tavern had ordered a credenza with a pop up TV inside it. It came to Vegas from Missouri. The door that opened for the TV to come out had warped....

I'm installing pre-manufactured cabinets. If done quite a few of these, and this brand is the best line I have done so far. It's a small kitchen. I...

The Tavern where I did some previous work,  wanted to make their wine cooler look a little more built in. Here it is. [20230130_092424.jpg] [20230...

No,  nobodies going to hire me for a real job-job......(unless a greeter position opens up at Tony_S' place) I'm just starting the design process ...