Share your craft projects
Make new craft buddies
Ask craft questions
Blog your craft journey
Jeff Vandenberg
1344 posts
and
49 followers
in over 9 years
in over 9 years
Maintenance of Tablesaw Blades
Quick Shop Tip that I do to get more life out of my saw blades. This is what I do. Your Tips are more than welcome.
Give me a thumbs up and subscribe to my channel. Thank you.
Watch “Maintenance of tablesaw blades” on YouTube
https://youtu.be/EdIY2EzGn-U
Jeff Vandenberg aka "Woodsconsin"
4 Comments
Cool tip.
Thumbs up!
Abbas, Castro Valley, CA
Thank you Jeff, great info. I have a bunch to do.
Jack
Jeff, do you use any spray or any type of resin remover on your blades?
CHRIS, Charlottetown PEI Canada. Anytime you can repurpose, reuse, or recycle, everyone wins!
Oh yeah. If i start getting build up ill wire brush the blade. If it wont come off i use the CMT pith remover then take the wire brush. The thing is after 100 to 150 bdft i just run the wire brush and it keeps me pretty clean. As soon as i notice that the wood is starting to get hard to push through i break out the Dimond card. All you have to do is dress up the face of the carbide. Don’t touch any of the sides for that will change the way the blade cuts.
Jeff Vandenberg aka "Woodsconsin"
