ash

This is where I made a few adjustments to the plans. The plans called for a 1-1/2" steel pipe (no luck sourcing anything local) I did have a few ...

A while ago I started another T and J building process. And from that what I think might be interesting I will make a blog entry. According the pla...

I saw a plan for a High Vise, which looked sturdy and it raises the work up to be seen better and no bending over. This is out of "Shop Notes" Vol ...

I decided to shape the Jaws on this while waiting for the order to arrive. THe Jaws consist of two sets, one is smoth which I will attach some leat...

Removed the clamps and everything looked good, had to scrap some glue excess off. The first thing up was to cut the curves at the top and bottom o...

Received the Acme Threads for this project. I did not want to drill any holes until I had them in hand to measure for the clearance needed. I set ...