A friend bought a set of dominoes for the Mexican Train game and the center piece was a thin cardboard piece that would slide under the dominoes. They wanted a thicker one. I cut them one out of some 1/2" walnut and did a little engraving on it to personalize it to the game..
It is finished with satin lacquer.
Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day
Thanks Larry and Bigblockyeti! Hi Alex, I did the engraving on the laser but cut the piece out on the scroll saw. My 20 W laser will only cut about 5/32" thick stock ! I made one of these in Arizona for a lady but never posted it or engraved it!
Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day
Thanks, Bruce. I don;t have the patience to wait 5 passes and I get a ton of smoke from cutting. I use a vac but some gets away!! I can cut 5/32" in one pass and I do it for some things. I did the cutting from laying it out on the piece and did not use the laser for the pattern.
Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day
Hi Rob. It is not my set but I think it is just a box or regular dominoes.
Hi Ivan. It is a game they play with dominoes where they place one in the center and then all the players start out with one in each of the slots. I played it years ago and forgot the rules.
Cheers, Jim
Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day
.png)
.png)
