lanwater

After I got my new Exterior door for the lid of the bench I needed to enable some hold-downs. Since the top is made from particle board 1.75" thick...

I made this knife some time ago from a HHS. saw blade. This little knife has never performed. I just could not get it sharp. After reading up on it...

Storage seems to be a problem in any shop, especially wall storage. I decided to store my clamps on some available ceiling space. It is a very simp...

I finally got all my veneer patches placed, at least those that would be cut this time. Here they are finished. The next job was to tape the layers...

Once the drawer mechanics were sorted out to my satisfaction, I was able to apply the marquetry to the last six and get a first coat of shellac on ...

Well all the colour decisions have been made and the flowers are glued in. The next job is to build a jewellery box to glue them onto. I have decid...

This project is almost finished. If I’m lucky the three main components of the baskets will be glued together tomorrow. Here’s what was done in pre...

With the legs already cut to length its time to glue them up. I have the joinery drawn out on the top roughly so that after cutting the boards the ...

There have been several discussions here lately about hide glue so I thought I might post a little primer I made up a while back to answer some que...

Surprised at the interest, now the pressure is really on (especially with Huff watching) ;) For me the first order of business is to get the bed ha...