Knife set for 2022 knife swap

935
15





This swap was a knife swap, and I wanted to make a folding knife. I got the mechanism from Santa Fe Stoneworks and dug out some stabilized birch I have left from Minnesota. It originally came from some wind-downed trees at Timber Bay Lodge, where we stayed on vacation back when we lived in Minnesota.







The folding knife came out ok, but there was a small chip in the birch on one side which I felt bad about. It still looks good, but it’s not great. I decided since I had a little more of the birch left, I would make a pair of cooking knives to make up for the blemished pocket knife.

I used blades from Hock Tools, specifically their paring knife and 5 inch chef knife. The paring knife got the more sedate grain from a straighter piece of wood, and as the wood was thinner than idea for knife scales, I sandwiched in some brown micarta.







I think the paring knife came out relatively well.

The chef knife got red (aka “fire”) micarta and some birch with some fairly crazy grain. It was from a crotch in the tree, and most of the grain ran the wrong direction for the strongest knife scales, but it looked pretty great visually, and the micarta and the metal tang of the knife would provide plenty of strength.







The chef knife came out pretty good, too. There’s a couple cracks in the handle that opened up when I was epoxying them to the micarta, but I filled them with sawdust and CA glue.

Finally, I made a couple boxes to hold the knives. By this time I knew who I was sending the knives to, and my guess was that the guy would get the folding knife, and his wife would get the cooking knives, so I wanted a separate box for each.

The cooking knives went into a box made of ash and walnut, with the walnut inlaid into the ash. I thought it looked pretty neat, and it’s a technique I’ll try again (probably to better result). I also made an insert to hold the knives securely in the box and to carry the care directions.



The pocket knife went into a foam insert inside a hinged box made of white oak and sapele, along with the description of the blade.



The set went to Pottz, who seemed to think they were ok.

May you have the day you deserve!

15 Comments

Great job on both the knives and the boxes!!
Love the grain, especially on the chef’s knife! Beautiful swap set. 

Ryan/// ~sigh~ I blew up another bowl. Moke told me "I made the inside bigger than the outside".

LMAO !!!! ok looks like dave cant wait for the official reveal as i didn't either. lets just say pottz is quite happy with what he got in this swap. that pocket knife is killer man.demascus pocket knife ? wow ! everything is over the top,as dave does nothing less ! ill be happy when the swaps are all here .

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Beautiful set of knifes Dave, and the boxes are wonderful. Well Done.

Main Street to the Mountains

Thanks, Barb!

Thanks, Ryan! I had a crotch from a storm-downed birch tree that I sliced up and stabilized, and this was some of the last of it. Crazy grain in some of it.

Thanks, Pottz! We started revealing this evening, as everyone had received their goodies. Glad you liked them, and the Damascus pocket knives are apparently a pretty good seller for my buddy. His all come with stone scales though. Or slices of mammoth tooth. He thought the birch looked pretty cool, too.

Thanks, Steve!

Thanks, Eric!

May you have the day you deserve!

Good job some one will be well pleased with these babies.

-- Soli Deo gloria! ( To God alone be the Glory)

Nice set/solo DP.  There is little to compare with the Damascus!

Read you mentioning stabilising.  If I remember correctly, it was you that might have covered that at LJ and had my attention span for a while, but eventually faded for lack of projects.  Any chance of a link (or two) as you might be able to find your stuff better than me.

If your first cut is too short... Take the second cut from the longer end... LBD

Thanks, Oldrivers!

Thanks, Ducky! At the moment, there is no link to a readable version of any of my blogs. One of my tasks for December is recreating them on my own site so that I’m in control of them. Not that I distrust Martin, but I put too much effort into them to risk having another site change vandalize them into illegibility.

May you have the day you deserve!

These are fantastic gifts for the swap, well made with the greatest amount of care & concern. Well done Dave, beautiful.
Thanks, Tom!

May you have the day you deserve!

 there is no link to a readable version of any of my blogs. 

So it was you?  At least I know where to start searching... as I was impressed with what I read at the time.

If your first cut is too short... Take the second cut from the longer end... LBD

Yes it was me, Ducky. But the blogs are basically unreadable now. 

May you have the day you deserve!

Great looking knives and box. The grain on the handles really stands out. Great job.   Mike

Thanks Mike!

May you have the day you deserve!