Search

When I left off last time I said that the “furniture” was done. That wasn’t quite true and it took quite a while to finish the job. Because I will ...

My attempt at learning to make hand-cut dovetails has ended in miserable failure. I don’t fault myself entirely, I also blame the crappy saw. I’m n...

Today I finished the scrolling and got the sides ready for the bottom panels. There are a some important points that are outlined below. GETTING&nb...

After moving into our new house near a year ago it’s finally time to build a real work bench. It will be 96" long, 27" deep and around 40-42" tall....

Very happy with my progress over labor day weekend! Bought a 5 lb box of 3 inch torx screws and went to town!!! I put 2×6×12 mudsill boards on the ...

So Got a chance to rip into today. Got metal floor off and keeping it off. Could only register this trailer for 9,999 lbs. The metal floor and the ...

I’m working on a new box This is the CAD design, as far as it goes. I’m not sure about the lid. I’ve started by building the bottom half (sides and...

Sides and legs made. Sides are 5 × 1 mm alternating Purpleheart and Pau Amarello, bent on an 87.5 to 92.5 mm radius. Legs are 3 mm thick Pau Amarel...

I have installed the dust collector hose to both saws, installed electrical outlet to the vacuum & both saws which are switched at the miter sa...

Well, I wanted to try a new (to me) joinery technique ie: A miter lock bit for my router table. It took some time to create an auxiliary fence and ...

Another part day getting the Panel Door to a completed dry assembly stage. It began with an overnight glue up of the panels, but first up a bit on ...

A couple of weeks ago I said good-bye to my Hitachi C10FL hybrid contractor saw. It had served me well, but a move in the near future makes it oppo...