Woodworking Blogs

I didn't have a lot of time to spend with the #45 this weekend but I did carve out a couple of hours to make a new tote and handle [Image] The orig...

KelleyCrafts suggested that maybe this plane would look good if it were blued. I thought that was a great idea! Blued steel looks nice usually and ...

I thought I'd mix it up a bit in this part of the blog and record a video where I: • Discuss what to look for when you pick up a secondhand brace a...

In this episode I wanted to look at using a hand brace and explore some of the so called hints and tips out there to see if they really are useful....

I know I said that sharpening an auger bit would be part 8 of this blog series, but I've taken the liberty of bringing it forward since the 'Using ...

During the restoration of RUSTY in Parts 1 to 4, I showed how to fix a couple of common problems. The first was scoring on the outside of the jaws ...

This entry will focus on the assembly of the V4 veneer vacuum kit from VeneerSupplies.com. I spoke about the choice of this pump in the first entry...

In this installment, I'll be talking about the actual implementation of the vacuum clamp, successes and failures, and what I plan to do next... As...

this blog has been a few days to completion mainly due to too hot outside or other Higher priority tasks overtaking it I carved all the drawer fro...

This entry is going to focus on the bits and bobs that turn the venturi pump from a pump into a workholding device. This one rambles a bit, so get ...

This is my project write up for the 2022 Screwdriver/Marking Tool Swap originally submitted over on another site. The project is basically in three...

Here we go again… Literally. It was a dark and stormy night. Well, no, not really stormy. Or even night. But it was dark. And wet. My son was with...