Indian Pallet timber Credenza

1047 views

8 entries

1 Introduction

OK after some re education as to how to add to blogs it looks like I may have got it worked out. Materials I am working with:- [IMG_7210.JPG] The ...

2 Making drawer fronts Cutting carving profiles and making a door joint

The two drawer fronts were biscuit ed "0" and glued together and put aside [IMG_7352.JPG] fairly straight forward [IMG_7353.JPG] then into the cl...

3 Face frame Door frames Raised Panels Nail Holes

The face frame The face frame for the credenza continues, a bit of a setback dimension wise as I realised after assembling every thing the Left a...

4 Panel work M & T work Dodging the rain work

Hoorah I actually got a dry day here in Sunny Queensland, well part of that is ...unbelievable weather really annoying for outside activities. So ...

5 Attempting to dodge the rain

In sheer frustration of having to pack up each day early due to overcast clouds and rain, I had a brainwave to relocate onto my veranda so I hauled...

6 More Nail and Knot work. Face Profiling and Whisker removal

I actually had a crack at a good day for a change. So first up was completing the nail hole plugging, and being a good Boy Scout testing if it was ...

7 Anybody built Face Frame Items using inset Euro hinges?

I went shopping for two sets of European Hinges for the Credenza I found a huge section dedicated to Euro hinges. [66 Euros all in a row 2.JPG] I f...

8 while waiting to decide what to do about my Euro hinges

You may have seen the Plywood off cuts I collected from CFI Industries [IMG_7217.JPG] Well I cut them up even smaller, or at least the 4mm sheet...