Jeff Vandenberg

1,365 posts and 47 followers in Dec 2014

Workbench / Outfeed Table #1 #7: Doors all glued up

876 views and 0 favorites in Mar 2015

Well the doors are all glued up and routed. I sanded them to 150 but I qant to go to 180 before putting on the tung oil. Then im heading to slot the top of the carcase’s to accept the lag bolts to attach the main top. Then moving onto sanding the face frame and going to finish the interior of the carcases before I install the drawer rails. Here are the pictures of the doors

Space balls installed to controll expansion and contraction of panel also t aid in no rattle.

Picture above sanded to 150 + edge profiled

Again

Picture above all sanded to 150 and edge profiled.

Below is my best friend he hangs with me the whole time im in the shop.

-- Jeff Vandenberg aka "Woodsconsin"

cabinet doors

Part 6: It's Hammer time
Part 7: Doors all glued up
Part 8: Doors, Drawer Fronts & Face Frame

View all parts of Workbench / Outfeed Table #1 »

Jeff Vandenberg

Mar 2015

Lol… yeppers, the inspector is chewing on a part of the door that failed. (Truth). Lol.
Yes Thorreain 14 yrs is a long time I hope she’ll hang in there as long as she can. Its really hard when that time comes.
Thanks for all the comments

-- Jeff Vandenberg aka "Woodsconsin"

lanwater

Mar 2015

Great work Jeff. The doors are outstanding.
I am sure the wood inspector check them all including the soundness of the wood and gave you an A+; great looking dog.

-- Abbas, Castro Valley, CA

Thorreain

Mar 2015

Very nice work Jeff. I have a similar wood recycling friend sharing my shop when she isn’t allowing me to drive her in the truck. But she’s on the down swing this winter, 14 years for a large dog is a long time. I love your choice of woods for the doors, great work.

-- CHRIS, Charlottetown PEI Canada. Anytime you can repurpose, reuse, or recycle, everyone wins!