Woodworking Blogs

Stupid tape measure. Always proving me wrong. I got my first box make and installed, which was for the CMS. I needed to get that thing off the floo...

I’m very tight on space. My original plan did not allocate room for a garbage can and only partially for dust collection. I think I’ve come up with...

I finally sat down with a calculator and paper and figured out the layout I’ve been roughly organizing in my head. I also decided to permanently fi...

If you know you are just going to build it once, measure twice and go for it. If you think you may build it again, make a template! It will save yo...

Well im making some head way. I did the reinforcement on the bottom beams because of inertia. I have the face frames done, & one on now. I did ...

Well I have all the cabinet carcase’s done and, all in line. I cut the top that will be attached to all the cabinet carcases to aid in weight distr...

I just watched woodsmith Shop Woodworking Tv show. They had a sliverware tray that had compund miters with finger joints on that miter. Has anyone ...

Has anyone ever done this? If so hows it working?http://www.instructables.com/id/Converting-Cordless-To-Lithium-Li-Po/

This is a fun little video I’ve been meaning to do for a while now. It is what I do every morning (with slight variations) when I’m in Green Valley...

Well after a few days off I started back up on the workbench/outfeed table. I have the cabinet carcases done except 1. I have two 12"×18", (1) 18"×...

When I decided to revamp my old veneer press in my Green Valley shop I decided to try something I have been thinking about for a while now. I remem...

Just a few more pictures and explanations than the project post had room for. The concept is simple and can be adapted in many ways but here is wha...