Woodworking Blogs

Just a couple of wooden toy vehicles for the children of a bloke I met at Goat Works I met Dan at Goat Works in Penrith were he works  https://goa...

Well, I guess we know IT works. The plane has been around for over a century. The question was, could I make it work? I haven't had any time to sp...

Cat-Bits Build #2: Frame the Panels Cat-Bits Build #3: Final Solution There are some things that LittleBlackDuck (aka LBD) puts on display that a...

A study of the inspiration piece tells me more than a few things about the layout of the recessed panels in this build. Specifically: 1) These rai...

Here’s what I’m after. And it’s the extent of a detailed plan. [EF32DB5F-05BE-413F-8B91-0CF8E184804A.jpeg] Here’s the inspiration piece. [22DA481C...

So, a couple years ago I spend a considerable amount of time both rebuilding and blogging about an ancient store counter that was salvaged a couple...

Making a couple of Legs for an Island. The granite top will hang over for sitting.  I had to use water base paint...yuck.... The brass is from a s...

To wrap up this project, I decided to apply some ash on most of the exposed plywood edges. [20230304-IMG_7701.jpg] And of course, no good deed goe...

Moving along to the top and bottom, had to surface a edge join a couple of pieces, to glue up for the width I needed. Used the Moxon bench top with...

Yeah, so, on a whim I tracked down a cash register to use when having what is becoming semi-annual rummage / garage sales. [69887634761__3454FA97-...

Sorry, I have totally biffed the format for making this a blog with all the links, etc. (I'm so ashamed) Cat-Bits Build #1: Make some panels Cat-B...

I wanted to make some hexagon boxes again, this time using thinner stock. Started out with some rough cut 4/4 Pecan and Maple about 8" wide and 8' ...